Air Filter Classification by Dust Collection Method
| Dust collection method | classification | structure | Product Review | Usage |
|---|---|---|---|---|
| filtered |
Automatic winding type |
It uses non-woven fabric (PET) and glass fiber and is automatically wound after a certain period of time. |
Auto Roll Filter |
Pre-treatment products for high-performance filters for building air conditioning and industrial factory air conditioning |
| Self-cleaning type |
It is used for hair planted on woven fabric and is automatically cleaned after a certain period of time. |
Auto Cleaning Filter | ||
| Regular cleaning type |
It is mainly made of non-woven fabric and is used after regular washing. |
Panel Type | ||
|
Filter material replacement type |
Various filter media can be used, but the filter media must be replaced regularly. |
Filter material replacement type |
||
| Unit replacement type |
Products are replaced regularly and many filters are eligible. |
Medium, HEPA and some Pre Filters |
General air conditioning and clean room, etc. | |
| electrostatic | Automatic winding type |
It is collected with a two-stage charged dust collection plate, and an automatically wound filtration type ilter is attached at the back. |
electrostatic precipitator |
For building air conditioning and industrial factory air conditioning |
| Regular cleaning type |
It is collected with a two-stage charged dust collection plate and cleaned regularly. |
electrostatic precipitator |
||
| Filter re-exchange |
It is a single-stage charging type, so only the filter material is replaced later. |
Non-power blackout type |
||
| Collision adhesive type |
Self-cleaning type |
It uses a plate/wire screen and automatically cleans in the basket. |
Auto Cleaning Filter | For building air conditioning and industrial factory air conditioning |
| Regular cleaning type |
Use after regular cleaning using wire mesh, etc. |
Demister | For removing impurities in fluid | |
| Adsorption type | Filter material replacement |
Use activated carbon, etc. and replace the activated carbon regularly . |
Carbon Filter | For removing harmful gases |
| Unit replacement type |
Use activated carbon non-woven fabric and replace units regularly. |
Carbon Filter |
Air Filter Classification by Dust Entry Size
|
house entrance view |
classification | structure | range | Usage |
|---|---|---|---|---|
| 조진용 | Panel Type |
It is mainly made up of a panel format using an aluminum frame . |
Gravimetric efficiency up to 95% |
For building air conditioning and industrial factory air conditioning or for filter pretreatment for improvement purposes. |
| Pocket Type |
This product maximizes the amount of air processed and is in bag format. |
|||
| disposable |
Most of them are made of paper and their lifespan expires after one use. |
|||
| Media exchange type |
It is a supplement to the panel type and has a structure that makes it easy to replace the filter material. |
|||
| Roll Type | This is an automatic winding air filter. | |||
| 중진용 | Bag Type |
It is in the form of a bag and is divided into three types depending on efficiency. |
Over 95% gravimetric efficiency, up to 95% colorimetric efficiency |
For building air conditioning final filter and dust filter pretreatment |
| Cell Type |
It is in the form of a cell and is divided into three types depending on efficiency. |
|||
| Mini Pleat | Cell Type or Non Separator. | |||
| 미진용 | HEPA Filter |
It has a cell type structure but uses high-performance filter media. |
0.3㎛99.97% | Clean room for semiconductors, pharmaceutical companies, etc. |
| ULPA Filter |
It has a cell type structure but uses high-performance filter media. |
0.1㎛99.999% | When achieving Class 100 or lower in clean rooms, etc. |
|
| For gas removal | Tray Type |
It consists of 6~10 trays using activated carbon, etc. |
For removing harmful gases |
For removing harmful gases during supply and exhaust |
| Panel Type |
It uses activated carbon non-woven fabric and is in panel format. |
PRE BAG FILTER
- characteristic
- 1. The filter media is bent into a pocket type to maximize the amount of air treated.
- 2. Used in buildings, industrial factories and painting booths.
- Usage
-
1. Used in places where there is a lot of wind that needs to be handled for
air conditioning and booths. - 2. Used in buildings, industrial factories and painting booths.
| Model | ACT-835 | ACT-845 |
|---|---|---|
| Depth(mm) | 350 | 450 |
| Standard dimensions(WxH) | 594x594x350x4p | 594x594x450x4p |
| Media material | Polyester | |
| Frame material | G.I | |
| Processed air volume(CMM) | 56(Max 80) | 70(Max 100) |
| Applicable wind speed | 2.5m/sec 이내 | |
| Pressure loss(initial) | 4.1mmAq(at 2.5m/sec) | 3.8mmAq(at 2.5m/sec) |
| Efficiency(AFI/gravimetric method) | 90% over(G4 grade) | |
| Heat resistance temperature | Within 80℃ | |
HMC / Medium-Cell type
- Performance
- 1.A medium-performance filter that guarantees a collection efficiency of 65%, 85%, or 95% depending on the media selection.
- 2.Frame is made of P/Board, P/Wood, STS, AL, etc.
- 3.Used for HEPA Filter pre-treatment in clean roo & precision machinery industry, hospital operating rooms, etc.
- Usage
- 1. Used as a medium-performance filter in building air purification, industrial factories, etc.
| Media | Glass fiber, Synthetic |
| Frame | P/Wood, G.I, AL, STS |
| Separator | AL |
| Sealant | Poly urethane |
| Gasket | Neoprene rubber |
| temperature of use | 100℃ |
| Applicable wind speed | 2.5m/sec |
| Shape | Header, Box |
H-HMC / High temperture medium(Cell type)
- Performance
- 1.A medium-performance filter that guarantees a collection efficiency of 65%, 85%, or 95% depending on the media selection.
- 2.Frame is made of P/Board, P/Wood, STS, AL, etc.
- 3. Used in high temperature drying furnace
| Media | Glass fiber |
| Frame | G.I, AL, STS |
| Separator | AL |
| Sealant | None or high temperature silicone |
| Gasket | None or Aramid |
| temperature of use | 300℃ |
| Applicable wind speed | 2.5m/sec |
| Shape | Header, Box |
K-Heat-resistant FILTER (HHR-100W)
- Performance
- 1. Applicable to high temperatures by using special synthetic fibers.
- 2. Since the media is not glass fiber, particles do not break and fly away.
- 3. Because the media is a synthetic fiber, it is easy to handle.
- Usage
- 1. For air conditioning in drying furnaces.
- 2. Other locations requiring heat resistance.
| Model | ACT-125W | ACT-150W |
|---|---|---|
| Media material | aromatic polyamide | |
| Frame material | AL, G.I, STS外 | |
|
Standard specifications (w*h*t, unit: mm) |
500 x 500 x 25t | 500 x 500 x 50t |
| Applicable wind speed | Within 1.5m/sec | |
| Pressure loss (initial) | 4.3mmAq(at 1.0m/sec) | 4.8mmAq(at 1.0m/sec) |
| Efficiency (AFI/gravimetric method) | 90% | |
| Heat resistance temperature | Within 240℃ | |
Carbon Filter / Panel Type(HCF-800)
- Performance
- 1.It is a type of non-woven fabric impregnated with carbon and is economical.
- 2.Production specifications are free to suit the equipment.
- 3.AL Carbon media is used as the main material for the frame, but the frame material can be selected.
- Usage
- 1.Removal of odor and harmful substances.
- 2.Mainly applied to various exhaust lines.
| Model | HCF-820 | HCF-850 |
|---|---|---|
| Thickness (mm) | 20 | 50 |
| Frame material | AL, G.I, STS外 | |
| Standard size (W x H) | 594 x 594, 594 x 289 | |
| Applicable wind speed | Within 2.5m/sec | |
| Support | AL Metallath, Clamp망, STS Wire外 | |
| Media | Carbon Fiber | |
| Pressure loss (initial) | 10 | 20 |
| Pressure loss (end stage) | 10 | 20 |
Ceiling Filter (HBVR-600)
- Performance
- 1.High efficiency due to special processing of synthetic fiber (PE).
- 2.Reinforce the resistance of the media by attaching a PE+urethane coated net to the back.
- Usage
- 1.Painting Booth Ceiling Filter.
- 2.Other locations requiring high-performance filters.
| Model | HBV-600 | HBVR-600 |
|---|---|---|
| Media material | Polyester (PE) | |
| reinforcement net | PE + Urethane Coating | |
| Thickness (mm) | 20±3 | |
| Applicable wind speed | Within 0.7m/sec | |
| Pressure loss (initial) | 7.9mmAq(at 0.7m/sec) | 7.9mmAq(at 0.7m/sec) |
| efficiency | MERV11 @0.23 | |
| Heat resistance temperature | Within 80℃ | |
Filter Media / Technical Data
| Model | HNS 1000 | HLF 500 | HLF 1000 |
|---|---|---|---|
|
|
|
|
| Usage |
|
|
|
| texture | Polyester + Flame Retardant Fiber | Polyester + Resin bond | Polyester + Resin bond |
| Production specifications (W x H) | 200cm x 20m/Roll | 200cm x 20m/Roll | 200cm x 20m/Roll |
| Thickness (mm) | 10T | 5T | 10T |
| regenerate | ○ | ○ | ○ |
| Flame retardant |
|
|
|
| Heat resistance temperature | up to 100 | up to 100 | up to 100 |
| Wind speed (m/sec) | 2.5 | 2.5 | 2.5 |
| Initial pressure (mmAq) | 6 | 7 | 7 |
| Final pressure (mmAq) | 20 | 20 | 20 |
| Dust collection efficiency (AFI weight) | More than 80% | More than 60% | More than 80% |
| Dust holding capacity (g/㎡) | 200 | 120 | 200 |